Heavy Duty Category 3 Top Link with Knuckle Ball Ends – 380mm Tube

Description

When you’re running big iron with heavy implements, your top link takes a beating every time you hit the field. Whether you’re pulling a monster disc through tough ground or working uneven terrain with a chisel plow, that top link is what keeps everything properly aligned and doing its job. This heavy-duty Category 3 top link with knuckle ball ends is built to handle the stress that comes with serious farming.

What You’re Getting

• 28mm pin diameter knuckle ball ends provide smooth articulation even under heavy loads
• 380mm heavy-wall tube construction resists bending and failure under extreme stress
• 831mm maximum opening and 577mm minimum closing gives you plenty of adjustment range
• Black finish coating protects against corrosion from fertilizer, salt, and weather exposure
• Direct replacement design fits Category 3 three-point hitch systems

Built for Real Farm Work

This top link is designed for Category 3 tractors – typically your larger machines running 140+ horsepower that pull serious implements. We’re talking about the tractors working 30-foot cultivators, heavy offset discs, big chisel plows, and commercial-grade rippers. The knuckle ball design is especially valuable when you’re working hillsides or rough ground where your implement needs to move independently without binding up.

Made to Last

That 380mm tube isn’t just thick for looks – it’s engineered to handle the massive forces generated by Category 3 implements without bending or breaking. The knuckle ball joints articulate smoothly even under heavy draft loads, unlike standard pin connections that bind up and wear out prematurely. This is the kind of component that keeps working season after season.

Installation Notes

Installation is straightforward, but start with the link centered in its adjustment range to give yourself room both ways. Those knuckle ball ends need to move freely, so keep them greased to prevent binding and premature wear. Remember, small adjustments make big differences – a quarter-turn can change your implement angle significantly.