Clockwise Updraft Rotary Cutter Blade for Tiger 26-Inch Rotary Cutters

Description

When your rotary cutter starts leaving strips of uncut grass or just beating down weeds instead of cutting them clean, it’s time for fresh blades. A dull blade doesn’t just make your cutting job look rough—it makes your tractor work harder and burns more fuel. This 26-inch clockwise updraft blade brings back that crisp, professional cut you need for maintaining pastures, cleaning fence rows, and handling tough brush work around the farm.

What You’re Getting

• Heavy-duty 26-inch overall length with 23.5-inch cutting reach from center hole
• Clockwise updraft rotation that lifts material for clean cuts and proper discharge
• Beefy 1/2-inch thickness that maintains momentum through heavy material
• 4-inch width provides plenty of cutting surface for efficient operation
• 1.5-inch center hole designed for secure mounting without wobble

Built for Real Farm Work

These cutters are commonly found on utility tractors used for pasture maintenance, roadside mowing, and keeping fence rows clean. Whether you’re cutting tall fescue, cleaning up around the barn, or maintaining food plots, this blade handles the job that lighter equipment can’t touch. The 2.5-inch offset creates the updraft action that lifts grass and weeds for a clean cut while throwing debris out the back where it belongs.

Made to Last

The heavy 1/2 inch thickness isn’t just for show—it gives this blade the mass it needs to maintain momentum through heavy material while resisting damage from rocks and stumps you didn’t see coming. The forged construction and proper heat treatment ensure the cutting edge stays sharp longer and stands up to the punishment of real farm work.

Installation Notes

This is a direct replacement blade that mounts with standard hardware. Always replace blades as a complete set to maintain proper balance—mismatched blades cause vibration that’s hard on your tractor and spindles. Make sure to torque the blade bolt to specification and check for any play in the center hole before putting the cutter back to work. Always disconnect PTO and remove the key before working under any rotary cutter. Support the deck securely – never trust hydraulics alone.