Description

When you’ve got one of those reliable Minneapolis-Moline tractors out there doing the work, keeping that engine oil clean is what separates machines that run for decades from ones that become expensive repairs. This Baldwin spin-on filter catches all the metal particles, dirt, and combustion byproducts that build up from normal operation, making sure your engine gets the clean oil it needs to keep running strong season after season.

What You’re Getting

Quality Baldwin filtration media that traps harmful contaminants while maintaining proper oil flow through your engine
Anti-drainback valve that keeps oil in the filter when you shut down, giving you instant oil pressure on startup instead of those scary seconds of dry running
Bypass valve that keeps oil circulating even if the filter gets clogged with debris during heavy-duty operation
Sturdy construction with reliable gasket seal that handles the vibration and pressure changes of farm work
Spin-on design with attached grommets for secure, leak-free installation

Built for Real Farm Work

This filter is designed specifically for Minneapolis-Moline tractors—machines that have earned their reputation for durability and dependable performance. Whether you’re using your tractor for field work, hay operations, or general farm duties, these engines work hard and deserve reliable filtration. The 4.41-inch length and 3.72-inch diameter provide adequate filtration capacity for the demanding conditions these tractors face.

Made to Last

Baldwin has been protecting engines for decades, and they understand what it takes to keep agricultural equipment running under tough conditions. The robust filter media captures contaminants down to the size that matters, while the sturdy canister construction handles the pressure fluctuations and temperature swings that come with real farm work.

Installation Notes

This is a direct spin-on replacement that installs in minutes. Clean the mounting surface, apply a thin coat of clean oil to the new gasket, then hand-tighten only 3/4 turn after the gasket contacts the surface. Over-tightening just makes the next change harder and can damage the seal, so resist the urge to crank it down tight.