Description
You know how frustrating it is when you’re halfway through a repair and realize the bolt you need is rusted solid or stripped out. This M8 x 100mm hex bolt with its zinc and yellow coating is the kind of hardware that smart farmers keep on hand—strong enough for real work and built to last through seasons of weather and use.
What You’re Getting
- Coarse thread design grips tight in steel and cast iron without cross-threading
- 100mm length handles thick mounting points and multiple-piece assemblies
- Zinc and yellow coating fights off rust and corrosion in wet conditions
- M8 size fits common metric applications on modern tractors and implements
- Hex head works with standard tools you already have in your toolbox
Built for Real Farm Work
This bolt size shows up all over farm equipment—securing brackets on three-point implements, mounting hydraulic cylinders, bolting together cultivator frames, and holding loader attachments in place. The 100mm length is perfect when you need to go through thick steel or sandwich washers and spacers between parts.
Made to Last
The zinc and yellow coating isn’t just for looks—it’s a proven system that keeps bolts working when cheaper hardware would be rusted tight by spring. The coarse threading bites into metal properly and won’t strip out like fine threads can when you’re working with painted or slightly corroded surfaces.
Good to Know
Always use a flat washer under the head to spread the load and prevent the bolt from pulling through thin material. If you’re replacing old bolts, clean the threads with a wire brush first. A dab of anti-seize on the threads makes future removal much easier, especially if the connection might see heat or road salt.
Reviews
There are no reviews yet.