Insert Bearing with Lock Collar for Agricultural Equipment - 3/4 Inch Bore
Sale!

Insert Bearing with Lock Collar for Agricultural Equipment – 3/4 Inch Bore

Original price was: $18.40.Current price is: $5.52.

SKU: SMA-851-SA20412RE Category:

Description

There’s nothing more frustrating than a seized bearing bringing your operation to a halt right in the middle of planting or harvest. This 3/4-inch bore insert bearing with spherical outer race and greasable design keeps your equipment running smoothly when you need it most. The spherical design lets the bearing self-align even when shaft deflection occurs, which is exactly what happens on tillage tools and implements that see plenty of flex and stress.

What You’re Getting

  • Greasable design with fitting lets you maintain the bearing without tearing into the housing
  • Spherical outer race compensates for shaft misalignment that’s common on field equipment
  • Lock collar securely grips the shaft without the stress concentration of set screws
  • 47mm outside diameter fits standard agricultural bearing housings
  • Narrow inner race design saves space where clearance is tight

Built for Real Farm Work

This bearing is right at home on cultivators, planters, disc harrows, and tillage equipment where shafts need to rotate smoothly under load. Insert bearings with spherical outer races are workhorses on agricultural implements because they handle the constant vibration and occasional shock loads that come with field work. You’ll find this size bearing supporting gauge wheels, depth wheels, and implement drive shafts on equipment from multiple manufacturers.

Made to Last

These bearings are built to handle the demanding conditions of agricultural use with proper heat treatment. The greasable design keeps contamination out while letting you add fresh grease to extend bearing life, which is especially important when you’re working in dusty or muddy conditions that would destroy a sealed bearing.

Installation Notes

The lock collar makes installation straightforward—just slide it onto the shaft and tighten the collar to lock it in place. Make sure to pump grease into the fitting until you see fresh grease coming out the seals, then back off to avoid over-greasing. With regular greasing, these bearings will give you years of reliable service.

Reviews

There are no reviews yet.

Be the first to review “Insert Bearing with Lock Collar for Agricultural Equipment – 3/4 Inch Bore”

Your email address will not be published. Required fields are marked *