Description
When you’re building hydraulic lines or repairing damaged hoses, having the right crimp fitting makes all the difference between a job that holds up and one that’ll leak on you down the road. This Parker 43 series fitting gives you a solid connection from 5/16 inch hydraulic hose to a 3/8 inch NPT male thread, so you can tap into hydraulic blocks, pumps, or other threaded ports with confidence.
What You’re Getting
- Permanent crimp connection that won’t work loose under pressure and vibration
- Parker quality construction designed to handle the pressures and temperatures of hydraulic systems
- Straight, rigid design that gives you a clean, direct connection without unnecessary bends
- 3/8 inch x 18 NPT threads that fit standard hydraulic components and fittings
- Precision machined threads that seal properly without over-tightening
Built for Real Farm Work
This fitting is perfect for connecting smaller hydraulic lines to main system components on tractors, implements, and other farm equipment. You’ll find 5/16 inch hose commonly used for pilot lines, control circuits, and lower-flow applications where space is tight. The NPT male end threads into hydraulic blocks, manifolds, or anywhere you need to connect a hose to a threaded port.
Made to Last
Parker fittings are built to handle the pressures and abuse that come with hydraulic systems on farm equipment. The crimp design creates a permanent seal that won’t come apart, even with the constant pressure cycling and vibration that hydraulic systems see during field work.
Installation Notes
This is a crimp-on fitting that requires proper crimping equipment and dies to install correctly. Make sure you use the right crimp specs for your hose type and size—improper crimping can cause dangerous failures. When threading into ports, use thread sealant or tape and don’t over-tighten, as NPT threads seal on the threads themselves, not the face.
Reviews
There are no reviews yet.