Description

When you need to connect two different pipe sizes in your irrigation system or spray rig, this handy reducer bushing makes the job simple. Whether you’re stepping down from a 1-1/2 inch main line to a 1 inch branch or connecting equipment with mismatched fittings, this polypropylene bushing gives you a solid, leak-free connection that’ll hold up season after season.

What You’re Getting

Male NPT threads on the outside (1-1/2 inch) screw into your larger fitting
Female NPT threads on the inside (1 inch) accept your smaller pipe or fitting
Lightweight polypropylene construction that won’t rust or corrode like metal fittings
Chemical resistant material that handles fertilizers, herbicides, and other farm chemicals
Compact design that fits in tight spaces where a coupling won’t work

Built for Real Farm Work

This reducer bushing is perfect for spray equipment, irrigation systems, nurse tanks, and liquid fertilizer setups. You’ll find it handy when connecting pumps to different sized plumbing, adapting spray booms, or building custom liquid handling systems around the farm.

Made to Last

The polypropylene material stands up to UV exposure, temperature swings, and chemical exposure better than metal alternatives. It won’t pit, rust, or seize up like galvanized fittings can, and it’s lightweight enough that vibration won’t crack threaded connections over time.

Good to Know

Use pipe thread compound or Teflon tape on the male threads for the best seal. Hand-tighten plus a quarter turn with a wrench is usually plenty—over-tightening can crack the poly material. If you’re working with high-pressure applications, double-check your system’s pressure rating against this fitting’s capabilities.