Description

When you need to connect different sized pipes or hoses in your irrigation system, hydraulic setup, or shop plumbing, this galvanized reducer bushing gets the job done right. Whether you’re stepping down from a 3-inch main line to a 2-inch feeder or connecting different sized components on your sprayer, this fitting makes that transition smooth and leak-free.

What You’re Getting

Heavy-duty galvanized construction that won’t rust or corrode in wet conditions
Male NPT threads on the outside, female NPT threads on the inside for a secure connection
Precision machined threads that seal tight with just pipe dope or thread tape
Direct size reduction from 3 inches down to 2 inches in one fitting
Standard NPT threading that works with most agricultural and hydraulic equipment

Built for Real Farm Work

This reducer bushing is perfect for irrigation systems, hydraulic tank connections, and shop air lines where you need to step down pipe sizes. It’s the same type of fitting you’ll find on sprayer pumps, tank outlets, and hydraulic reservoirs where different sized connections meet.

Made to Last

The galvanized coating protects against rust and corrosion, even in wet field conditions or around chemical sprayers. These fittings handle the pressure and vibration that comes with hydraulic systems and irrigation equipment without loosening up or leaking.

Good to Know

Use pipe thread compound or quality thread tape on both the male and female connections for the best seal. Hand-tighten first, then use a wrench to snug it down—don’t overtighten and risk cracking the fitting. Make sure your pipe ends are clean and square for the best connection.