Description

Got a great deal on a bigger implement at the auction, but the pins won’t fit your tractor’s top link? This simple bushing adapter solves the hookup problem by letting your Category 2 top link accept Category 3 pins. No more staring at that perfect disc or cultivator sitting unused because the three-point hitch components don’t match up.

What You’re Getting

Converts Category 2 top links to work with Category 3 implement pins
Heavy-duty steel construction that handles high draft loads without crushing
Simple slip-in installation with no drilling or welding required
Precise fit maintains proper pin alignment and connection strength
Works with multiple top link part numbers for broad compatibility

Built for Real Farm Work

This bushing is designed for the tremendous forces your top link endures when you’re pulling heavy implements or working tough ground. Whether you’re running a larger disc harrow, cultivator, or chisel plow that came off a bigger tractor, this adapter maintains the connection integrity you need. The wall thickness is engineered to prevent distortion under load while providing the exact fit between categories.

Made to Last

This isn’t just a piece of pipe with the right dimensions. It’s precisely machined steel built to handle the compression and tension forces that three-point hitches deal with every day. The steel construction resists crushing and maintains its shape even under the heaviest draft loads your equipment can generate.

Installation Notes

Installation is straightforward – the bushing slides into your implement’s Category 3 connection point, then your Category 2 top link pin goes through the bushing. Always verify your tractor can safely handle the larger implement’s weight and hydraulic demands before hooking up. Keep a few of these bushings handy if you’re running mixed categories of equipment – they’re inexpensive insurance against hookup delays.