Description

When you need to make a tight connection in limited space, a 90-degree elbow fitting can be a real lifesaver. This hydraulic hose barb elbow lets you route your hydraulic lines around obstacles and into hard-to-reach spots without kinking or crushing your hose. It’s the kind of fitting that turns a difficult installation into a straightforward job.

Key Features

90-degree bend redirects hydraulic flow around tight corners and obstacles
1-1/4 inch NPT male thread provides secure connection to hydraulic blocks or manifolds
1-1/2 inch hose barb grips hydraulic hose firmly with multiple ridges
Durable construction handles high-pressure hydraulic systems without failure
Compact design saves valuable space in crowded hydraulic installations

Built for Real Farm Work

This fitting works great on tractors, combines, and hydraulic implements where space is tight and you need to make clean hydraulic connections. Whether you’re plumbing remote hydraulics on a loader, connecting auxiliary circuits, or routing lines around the engine compartment, this elbow keeps your hydraulic hoses from sharp bends that cause premature failure.

Made to Last

Farm hydraulics see serious pressure and constant vibration, so this fitting is built to handle the punishment. The threaded connection seals tight with proper thread sealant, and the hose barb design creates a leak-proof connection that won’t blow off under pressure.

Good to Know

Use quality hydraulic thread sealant on the NPT threads—avoid Teflon tape that can break loose and contaminate your system. Make sure your hose clamps are positioned properly over the barb ridges for maximum holding power. A little hydraulic fluid on the barb makes hose installation much easier.