SAE Code 61 Flange 45 Degree Elbow Crimp Fitting for Ryco Hydraulic Systems

Description

When you’re routing hydraulic hoses in tight spaces around your tractor or implement, sometimes a straight fitting just won’t work. This 45-degree flange elbow gives you the angled connection you need to get hydraulic flow exactly where it needs to go without kinking or stressing your hose. Whether you’re working around frame rails, cylinders, or other components, this Ryco fitting makes those tricky routing jobs a whole lot easier.

What You’re Getting

• SAE Code 61 flange design creates a secure, leak-free connection that won’t back out under pressure
• Ryco T2000 series construction built specifically for farm equipment applications
• 45-degree angle allows routing around obstacles while maintaining proper flow
• Direct replacement for OEM fittings—no modifications or adapters needed
• Crimp-on design creates a permanent, reliable connection for long-term use

Built for Real Farm Work

This fitting is designed for tractors, combines, skid steers, and implements that use 1/2-inch hydraulic hose in their systems. You’ll find yourself reaching for this angled fitting when connecting loader circuits, three-point hydraulics, or auxiliary systems that power everything from rotary cutters to post hole diggers. The 45-degree angle is especially handy when space is tight and you need to route hoses around components without creating sharp bends.

Made to Last

Ryco quality means it’s built to handle the pressure spikes and vibration of farm equipment. The flange connection distributes stress better than threaded fittings, and the angled design reduces strain on both the hose and the equipment connection points. This isn’t a lightweight fitting that’ll fail when you need it most.

Good to Know

This is a crimp-on fitting, so you’ll need the proper crimping tool and dies to install it correctly. Make sure your hose is cut square and clean before crimping—a good, straight cut makes all the difference in getting a proper seal. The 49mm cutoff allowance gives you room to work with when measuring your hose length for the perfect fit.