Description

If you’ve got a clicking PTO shaft or feel vibration coming through your implement, chances are your universal joints are crying out for attention. That rhythmic ticking that gets worse under load isn’t going to fix itself, and worn U-joints are a one-way ticket to expensive breakdowns right when you need your equipment most. This Weasler cross and bearing kit gets your Bondioli Series 1 driveline back to smooth, reliable operation.

What You’re Getting

Complete kit with precision-machined cross that maintains exact 90-degree angles between bearing journals
Tight-tolerance needle bearings that eliminate the slop that causes accelerated wear
Type 2 design with snap ring grooves in the yokes for straightforward service
22mm bearing cap diameter and 54mm overall length for perfect Series 1 fit

Built for Real Farm Work

This kit is designed for Bondioli-Pavesi Series 1 PTO systems, commonly found on mid-size tractors and implements where reliable power transfer is critical. Whether you’re running a rotary cutter, spreader, or other PTO-driven equipment, these joints handle the constant flexing and torque loads that come with real farm work.

Made to Last

Weasler doesn’t mess around when it comes to PTO components—they know equipment downtime costs money and delays can ruin harvests. The cross is precision-machined to maintain proper geometry under load, while the needle bearings are manufactured to specifications that ensure smooth rotation and long service life even in demanding agricultural conditions.

Good to Know

Replacement is straightforward with basic shop tools, but take your time to mark yoke positions before disassembly—proper phasing prevents vibration issues. Always replace snap rings with new ones from the kit, as reused rings lose tension and can pop out at the worst possible moment. Grease thoroughly after installation and check for smooth operation through the full range of motion.