Toolbar Clamp for 1×3 Inch Shank and 5×7 Inch Bar

Description

When you’re setting up or repairing field cultivators, planters, or other toolbar implements, getting your shanks and attachments properly secured is critical. A loose shank can cost you time, money, and a lot of frustration when you’re trying to get through a field. This heavy-duty toolbar clamp locks your 1×3 inch shanks to your 5×7 inch toolbar with the solid connection you need to keep working.

What You’re Getting

• Precision fit for 1×3 inch shanks and 5×7 inch toolbars—no wobbling or slipping
• Heavy-duty construction with 3/8 inch x 6 inch body that handles the stress of field work
• Quality plated nuts and 1 inch bolts that resist corrosion and stay tight
• 5/8 inch set screws provide extra holding power to prevent shank movement
• Fitted cap design keeps dirt and debris out of the threads

Built for Real Farm Work

This clamp is designed for the bigger toolbar implements you’ll find on field cultivators, strip-till bars, and heavy-duty planters. The 5×7 inch toolbar size is common on larger implements that need the extra strength for deep tillage work or heavy planting attachments. Whether you’re running through tough clay or rocky ground, this clamp keeps everything where it should be.

Made to Last

Farm implements take a beating, and toolbar clamps are right in the thick of it. This one’s built with heavy steel construction and plated hardware that stands up to mud, moisture, and the constant vibration of field work. The set screws and main bolts work together to distribute the load and prevent metal fatigue.

Installation Notes

This is a direct replacement that installs just like your original clamp. Clean the threads on your toolbar before installation, and don’t forget to apply some anti-seize compound to prevent future corrosion. Tighten the main bolts first, then snug down the set screws to lock everything in place.