90-Degree Female JIC Swivel Elbow Crimp Fitting for 1-1/2 Inch Hydraulic Hose

Description

When you’re connecting hydraulic lines around tight corners or need to change direction without putting stress on your hose, this 90-degree swivel elbow gets the job done right. This fitting is designed for tractors and equipment that run hydraulic implements like loaders, backhoes, mowers, and remote cylinders. The swivel design lets your hose move naturally with equipment operation instead of binding up or wearing out from constant flexing.

What You’re Getting

• 90-degree elbow design redirects hydraulic flow cleanly around obstacles
• Female JIC 37-degree flare connection with 1-7/8 x 12 threads for secure, leak-free attachment
• Swivel movement prevents hose twist and reduces stress on connections
• Crimp-on design for permanent, high-pressure attachment to 1-1/2 inch hydraulic hose
• 4S series construction built to handle demanding agricultural hydraulic pressures

Built for Real Farm Work

This fitting handles the big hydraulic lines found on larger tractors and heavy equipment where 1-1/2 inch hose carries the flow for high-capacity loaders, large implements, and heavy-duty hydraulic motors. When you’ve got hydraulic lines that don’t quite match up or need to adapt between different fitting types, this piece bridges the gap and keeps your hydraulics flowing smoothly. Whether you’re plumbing a new loader installation or replacing worn fittings on existing equipment, this elbow handles the pressure and flow demands of serious hydraulic work.

Made to Last

These fittings are made of materials that resist corrosion, pressure, and wear. The JIC 37-degree flare provides a metal-to-metal seal that won’t fail under pressure, and the swivel joint is engineered to move freely even after years of service. Quality construction means this fitting will handle whatever your hydraulic system demands without leaking or failing when you need it most.

Installation Notes

This is a crimp-on fitting that requires proper hydraulic hose crimping equipment for installation. Always use proper thread sealant on hydraulic fittings – never just tape that can contaminate your system. Clean both fitting surfaces before connecting, and don’t over-tighten as this can damage the threads or crack the fitting body. A snug fit with proper sealant beats overtightening every time. The swivel should move freely after installation – if it binds, back off slightly on the connection.