Description
When you’re routing hydraulic lines around tight spaces on your tractor or equipment, sometimes a straight connection just won’t work. This 45-degree elbow fitting gives you the angle you need to snake hoses around obstacles without creating sharp bends that can restrict flow or damage the hose. It’s one of those simple parts that can save you from hours of frustration trying to make connections fit.
What You’re Getting
- Steel construction that handles the pressure and abuse of farm hydraulic systems
- 45-degree angle provides smooth flow direction changes without restrictive bends
- 1/2 inch male JIC (3/4-16 thread) on one end connects to standard hydraulic hoses and fittings
- 3/8 inch male pipe thread on the other end fits into standard pipe-threaded ports
- AgSmart brand quality you can count on for reliable performance
Built for Real Farm Work
This fitting is perfect for connecting hydraulic lines on tractors, loaders, implements, and other agricultural equipment where you need to change direction at a moderate angle. Whether you’re plumbing a loader valve, connecting remote hydraulic outlets, or routing lines around frame members, this elbow helps you make clean, professional connections that won’t leak or fail under pressure.
Made to Last
Farm hydraulics deal with high pressures, temperature swings, and constant vibration. This steel elbow is built to handle those conditions season after season. The threads are precision-cut for a tight seal, and the steel construction won’t crack or split like cheaper fittings might under stress.
Installation Notes
Use thread sealant or tape on the pipe thread end to ensure a leak-free connection. The JIC end seals with its built-in flare, so no sealant is needed there. Hand-tighten the JIC connection first, then use a wrench for the final snug-up—over-tightening can damage the flare seal.
Reviews
There are no reviews yet.