Description

When you start noticing oil mist in the air around your tractor or spots on the ground after parking, chances are your rocker cover gasket has given up. That old gasket’s job is to keep the oil where it belongs—lubricating your valves and rockers, not decorating your engine bay or the shop floor. This replacement gasket gets things sealed up tight so you can get back to work without the mess.

What You’re Getting

Precise fit that seals properly against both the rocker cover and cylinder head
Oil-resistant material that won’t break down from heat and petroleum products
Flexible construction that maintains seal even as the engine heats up and cools down
Direct replacement that fits without any modifications or special tools

Built for Real Farm Work

This gasket fits Landini tractors from the 500 Series like the 9500, plus the Large Series models including the 10000 and 10000 S—all equipped with the reliable 6354 engine. These are serious tractors built for demanding farm work, from heavy cultivation to loader operations, and they need parts that can handle the constant vibration and temperature changes that come with real farming.

Made to Last

Farm engines run hot and work hard, so this gasket is made from materials that stay flexible through thousands of heat cycles. It won’t get brittle and crack like cheap gaskets do, and it resists the oils and solvents that would eat up inferior seals. You’ll get years of reliable service from this one.

Installation Notes

Clean both mating surfaces thoroughly—any old gasket material or oil residue will cause leaks. A razor blade scraper works well for stubborn bits. Don’t overtighten the cover bolts; just snug them evenly in a cross pattern. The gasket does the sealing, not the torque.