Description

When your conveyor or feeder chain starts skipping or wearing unevenly, it’s often a worn sprocket that’s causing the trouble. This 12-tooth weld sprocket gets your #60 chain running smooth again, whether it’s on a grain elevator, conveyor system, or equipment drive. The right tooth count makes all the difference for proper chain engagement and smooth operation.

What You’re Getting

Precision-cut teeth that mesh perfectly with standard #60 chain for reliable power transfer
W-Series hub design that’s built for smaller diameter applications and lighter duty work
Welded construction that handles the constant stress of chain operation
12 teeth provide the right balance of speed and torque for most conveyor applications

Built for Real Farm Work

This sprocket fits right into agricultural conveyor systems, grain handling equipment, and other machinery that uses #60 chain. You’ll find this size commonly used on augers, elevators, and feed systems where you need reliable chain drive without the bulk of larger sprockets. The 12-tooth design gives you good speed while maintaining enough contact with the chain for smooth operation.

Made to Last

The welded hub construction means this sprocket can handle the repetitive loading that comes with moving grain, feed, or other materials. It’s built to stay true under load and keep your chain tracking properly season after season. The steel construction resists wear even when dealing with dusty conditions or occasional debris.

Good to Know

Make sure your chain is properly tensioned when installing a new sprocket—too loose and it’ll skip, too tight and it’ll wear prematurely. If you’re replacing just the sprocket, check your chain for wear while you’re at it. Sometimes it makes sense to replace both at the same time for best performance.