Description

When that grinding sound starts coming from your disc gang, you know it’s time for new bearings. A worn bearing doesn’t just make noise—it lets your discs wobble and wear unevenly, making them less effective at cutting through residue and preparing a proper seedbed. This Timken disc bearing gets your tillage equipment back to running smooth and true.

What You’re Getting

1-1/2″ square bore designed for standard disc gang axles
100mm outer diameter provides plenty of load capacity for heavy disc work
Factory-sealed construction keeps dirt and debris out while holding grease in
Timken quality construction that handles the shock loads of field work
Direct replacement for worn bearings—no modifications needed

Built for Real Farm Work

This bearing replaces DC211TT3 and other common agricultural bearing numbers used on disc harrows, cultivators, and tillage equipment from manufacturers like Amco, Athens, and A.C. Whether you’re working corn ground in the spring or chopping stalks in the fall, this bearing is built to handle the constant vibration and impact that comes with cutting through tough soil conditions.

Made to Last

Timken bearings are the gold standard in agricultural applications because they’re built to take a beating. The sealed design keeps contamination out even in dusty conditions, while the precision construction ensures smooth operation under heavy loads. You’ll get seasons of reliable service before needing to think about replacements again.

Installation Notes

This bearing presses into standard disc gang housings and fits 1-1/2″ square axles. When replacing bearings, it’s a good time to check your axle for wear and make sure your housing isn’t cracked. Pack the housing with fresh grease during installation even though the bearing comes pre-sealed—the extra protection never hurts in dirty field conditions.