Description

When you’re working on hydraulic plumbing and need to change direction in tight spaces, this 90-degree union elbow gets the job done. Whether you’re hooking up a loader valve or routing hydraulic lines around the engine bay, sometimes a straight fitting just won’t work. This steel elbow gives you that sharp corner turn while keeping full flow through your 3/8″ hydraulic tubing.

What You’re Getting

90-degree steel elbow with male ORFS threads on both ends for secure tube connections
High-pressure rating of 9200 PSI handles anything your hydraulic system can throw at it
Precision-machined 11/16″-16 threads ensure leak-free connections every time
Heavy-duty steel construction stands up to vibration and temperature extremes

Built for Real Farm Work

This fitting works with any hydraulic system using 3/8″ ORFS (O-Ring Face Seal) tubing. You’ll find these connections on loader circuits, remote hydraulic valves, and auxiliary hydraulic systems on most modern tractors and implements. The ORFS design creates a more reliable seal than traditional flare fittings, especially in high-vibration applications.

Made to Last

Steel construction means this fitting won’t crack under pressure or strip out like softer materials. The machined threads cut clean and stay tight, while the heavy wall thickness handles the stress of high-pressure hydraulic systems without distortion.

Installation Notes

Thread the fitting hand-tight first, then use the 11/16″ flats to snug it down with a wrench. Don’t forget to use new O-rings on both connections—old or damaged seals are the quickest way to create a leak. A little hydraulic fluid on the O-rings makes assembly easier and helps prevent damage during installation.