Description

When you need to secure moving parts or replace a worn roll pin that’s causing play in your linkages, this hefty 1/2 inch diameter roll pin gets the job done right. At 2-1/2 inches long, it’s sized for serious applications where a standard pin just won’t cut it—think hydraulic cylinders, loader arms, and three-point hitch components that take a beating every day.

What You’re Getting

Heavy-duty 1/2 inch diameter for maximum holding power in high-stress applications
2-1/2 inch length handles deep bores and thick-walled components
Spring steel construction that compresses for installation then expands for a secure grip
Split design distributes load evenly to prevent cracking or pin failure

Built for Real Farm Work

This pin is perfect for hydraulic cylinders, loader pivot points, and implement linkages where you need a reliable connection that won’t work loose under load. You’ll find these used in everything from compact tractor loaders to three-point hitch assemblies on larger machines. When regular clevis pins aren’t practical and you need something that stays put through vibration and side loads, roll pins are the answer.

Made to Last

Roll pins are designed to handle the constant stress and movement that comes with agricultural equipment. The split construction lets the pin compress during installation, then spring back to create a tight fit that holds even when things get rough. Quality steel construction means it won’t fatigue and fail like cheaper pins might.

Installation Notes

Drive the pin in with a punch slightly smaller than the pin diameter—never use a hammer directly on the pin. A little penetrating oil on the bore helps with installation and removal. If you’re replacing one, check the bore for wear or damage that might cause the new pin to work loose.