Description

When you’re filling tanks, moving liquids between containers, or connecting hoses to your sprayer, you need connections that lock tight and don’t leak. This Banjo E Series cam lock coupler gives you that secure connection with the convenience of a quick-connect system that works with wet or dry hands, even when you’re in a hurry to get back to the field.

What You’re Getting

Cam lever design locks tight with just a quarter turn – no threading or tools needed
1-inch male adapter connects to standard female cam lock fittings on tanks and equipment
1-1/4 inch hose shank slides inside your hose and clamps down solid
Heavy-duty poly construction won’t rust or corrode like metal fittings
Rated for 300 PSI so it handles the pressure from your transfer pump without worry

Built for Real Farm Work

This coupler shines when you’re moving liquid fertilizer, herbicides, diesel fuel, or water around the farm. The E Series design is perfect for connecting hoses to spray tanks, nurse tanks, or bulk storage containers. You’ll find these cam locks on everything from pull-behind sprayers to custom spray rigs and liquid fertilizer applicators.

Made to Last

Farm chemicals and weather are tough on fittings, but this polypropylene construction stands up to both. It won’t crack in cold weather or get brittle from UV exposure, and chemicals that would eat up metal fittings just rinse right off. The cam mechanism stays smooth and easy to operate even after hundreds of connections.

Installation Notes

The hose shank slides into your hose about 2 inches and gets secured with hose clamps – use two clamps for a bulletproof connection. Make sure your hose is properly sized for the 1-1/4 inch shank, and always check that the cam lever is fully locked before pressurizing the system.