Description

Every farmer knows the frustration of a loose lever, wobbly steering shaft, or implement that won’t stay locked in position. When you need a solid connection that won’t back out under vibration and hard use, this 1/4 inch by 2-1/2 inch roll pin gets the job done. It’s the kind of simple, reliable fastener that keeps your equipment running when there’s work to do.

What You’re Getting

Spring steel construction that compresses to fit through holes, then expands for a tight hold
Split design creates multiple contact points that resist vibration and won’t walk out
Hardened steel that handles the shock loads and constant movement of farm machinery
Universal design works in tractors, implements, and equipment from any manufacturer

Built for Real Farm Work

This roll pin fits wherever you need a secure shaft-to-hub connection or need to lock components in place. You’ll find these pins holding everything from PTO shafts and steering columns to implement adjustment mechanisms and loader bucket pins. Whether it’s a vintage tractor restoration or keeping your current equipment tight, this is the same type of pin that’s been trusted on farms for decades.

Made to Last

Farm equipment puts pins through a lot – constant vibration, dirt, moisture, and temperature swings that would loosen other fasteners. The spring steel construction of this roll pin means it maintains tension even when holes wear slightly, and the hardened material resists shearing under load.

Good to Know

Use a pin punch or drift that’s slightly smaller than the pin diameter to avoid mushrooming the ends during installation. A little grease on the pin makes driving easier and helps prevent corrosion. If you’re replacing a worn pin, check that the hole hasn’t elongated – you might need to step up to the next size for a proper fit.