Swivel 90 Degree Hydraulic Elbow Fitting – 3/8 Inch OFS Thread Male to Female

Description

When you’re trying to route hydraulic lines around engine components or through tight spots on your tractor, sometimes a straight fitting just won’t work. This 90-degree swivel elbow solves those routing headaches by letting you make sharp turns without kinking hoses or putting stress on connections. The swivel action means you can tighten the threaded connections first, then rotate the hose end to exactly the angle you need.

What You’re Getting

• Built tough for farm hydraulics with high-pressure capability up to 9200 PSI – handles whatever your system throws at it
• O-ring face seal (OFS) design provides reliable sealing that resists hydraulic fluid and stays tight under pressure
• 3/8 inch tube size with 11/16-16 thread pitch – common size for many tractor hydraulic applications
• Swivel joint moves freely even after years of use in dusty, dirty conditions so you can position lines exactly where needed
• Steel construction stands up to vibration and temperature swings from winter to summer

Built for Real Farm Work

This fitting is designed for hydraulic systems on tractors, loaders, balers, and other farm equipment where space is tight and you need to make connections at angles. Whether you’re plumbing remote hydraulics for implements, fixing a cylinder line on your loader, or building custom circuits for specialty equipment, this elbow fitting handles the job with room to spare for the demanding pressures of modern hydraulic systems.

Made to Last

Farm hydraulics operate under high pressure and face constant vibration, so this fitting is built tough with O-ring sealing that handles the pressure while resisting hydraulic fluid breakdown. The steel construction won’t crack or split like cheaper fittings, and the swivel mechanism stays smooth even after countless cycles in harsh conditions.

Installation Notes

Use proper torque specifications when tightening – the 3/4 inch hex flats give you good wrench purchase for secure installation. The swivel feature means you can tighten the threaded connection first, then rotate the hose end to the angle you need. Always use clean hydraulic fluid on threads and O-rings during assembly to prevent galling and ensure proper sealing.