Description

If you’ve been fighting hard starting, rough idle, or that telltale missing and sputtering when your John Deere gets under load, worn ignition points are likely the culprit. These points open and close thousands of times per minute to fire your spark plugs, and when they get burned or the gap wears out of spec, your tractor loses power and becomes unreliable when you need it most.

What You’re Getting

Pre-assembled points save you time and ensure proper alignment from the start
Quality TISCO construction built to handle the demanding duty cycles of farm work
Precise gap setting maintains proper ignition timing for maximum power
Includes gauge for proper point gap setting so you get it right the first time
Direct replacement for original equipment – no modifications needed

Built for Real Farm Work

This point set fits John Deere tractors equipped with traditional distributor ignition systems. Whether you’re running an older gas-powered John Deere through daily chores, cultivating with a mid-size tractor, or using a utility model for loader work, reliable ignition is what gets you through long days in the field.

Made to Last

TISCO builds these points to withstand the constant electrical arcing and mechanical wear that comes with ignition system operation. The contact surfaces resist burning and pitting while the spring tension stays consistent, ensuring reliable spark delivery season after season.

Installation Notes

Installing new points takes about 30 minutes with basic tools. Set the gap to manufacturer specs using the included gauge – usually around 0.016 inches for most applications. The proper gap setting is critical for timing and performance, so take your time and double-check before buttoning things up. Consider replacing your condenser at the same time since they typically fail together.