Wheel Stud for Agricultural Equipment and Tractor Front Wheels

Description

When you spot a bent, stretched, or missing wheel stud on your tractor, that’s not something you can put off fixing. One failed stud puts dangerous extra stress on all the others, and you really don’t want to find out what happens when more start failing – especially when you’re loaded heavy or running down the highway. This 1/2″-20 wheel stud with 1-3/4″ under-head length gets your wheel mounting back to full strength where it needs to be.

What You’re Getting

• Proper 1/2″-20 thread pitch that matches most tractor wheel hubs
• 1-3/4″ under-head length provides adequate thread engagement for safe operation
• Heat-treated steel construction built to handle heavy loads and road stress
• Precision rolled threads that resist stripping when you’re torquing lug nuts
• Direct replacement that installs just like the original factory stud

Built for Real Farm Work

This wheel stud fits a wide range of agricultural equipment and tractors that use the standard 1/2″-20 thread pattern. Whether you’re running a utility tractor with a loader, pulling implements across rough ground, or hauling grain wagons down country roads, these studs handle the constant stress and vibration that comes with farm work. They’re the same heavy-duty specification that equipment manufacturers rely on for safe wheel attachment.

Made to Last

Wheel studs live a tough life under constant tension from lug nuts and exposed to moisture that can cause corrosion. This replacement uses proper grade steel that’s heat-treated for the right balance of strength and flexibility. The threads are rolled, not cut, which makes them stronger and less likely to strip or fail under load.

Installation Notes

You’ll need to remove the wheel and likely the brake drum or hub to press out the old stud and press in the new one. Never try to hammer in a new stud – use a proper press or the lug nut draw-in method with washers to protect the threads. Always replace damaged studs immediately, and when installing, put a drop of anti-seize on the threads to prevent future corrosion.