Engine Oil Filter for Deutz Agro Plus 75-95, Fendt, Same, Lamborghini and Hurlimann Tractors

Description

When you’re putting serious hours on your European tractor during planting season or long days with the loader, that oil filter is working overtime to keep expensive engine parts protected. A worn-out filter lets contamination circulate through your engine, and that’s when you start seeing accelerated wear on bearings, cylinder walls, and other critical components. Fresh, clean oil flowing through your engine is what keeps everything running smooth for thousands of hours.

What You’re Getting

• High-efficiency filtration media that captures dirt and metal particles down to the microscopic level
• Anti-drainback valve keeps oil in the filter when shut down, so you get instant pressure on startup
• Sturdy construction handles the pressure spikes and temperature swings these hardworking engines create
• Built-in bypass valve ensures oil flow continues even if the filter gets completely clogged
• Direct replacement that fits like the original – no modifications needed

Built for European Engine Protection

This filter fits the Deutz Agro Plus 75-95 series along with various Fendt, Same, Lamborghini, and Hurlimann models that are the backbone of many farming operations. Whether your Deutz is running a front loader all day, your Fendt is pulling cultivation equipment through tough ground, or your Same is handling daily chores around a dairy operation, these tractors demand consistent oil protection to keep running reliably season after season.

Made to Last

European engines are built for longevity, but they need quality filtration to reach their potential. This filter uses filtration media that catches the particles that cause the most damage while maintaining proper oil flow to critical engine components. The robust construction handles the demanding conditions these tractors face, from cold morning startups to sustained high-load operation during busy seasons.

Good to Know

When you’re changing this filter, clean the mounting surface thoroughly and apply a thin film of fresh oil to the gasket before installation. Hand-tight plus 3/4 turn is all you need – over-tightening crushes the gasket and creates leaks. Always change your oil and filter together since putting a new filter on contaminated oil defeats the purpose. Check your oil level after the first few hours of operation since the new filter will hold some oil.