Description

When you’re running hydraulic implements that need to move and pivot—like loaders, backhoes, or remote cylinders—rigid hose connections just don’t cut it. This 4.75-meter hydraulic hose assembly with swivel fittings gives you the flexibility to connect equipment that needs to rotate or articulate without binding up the hose or creating stress points that lead to leaks.

What You’re Getting

Swivel fittings on both ends let connections rotate freely under pressure
3/8 BSP threading provides secure, leak-free connections
4.75-meter length handles most standard equipment configurations
Quality construction stands up to high pressure and constant movement
Direct replacement for worn or damaged hydraulic lines

Built for Real Farm Work

This hose is designed for tractors and equipment running hydraulic implements like front-end loaders, backhoes, mowers, and remote cylinders. Whether you’re moving round bales, operating a brush hog, or running a hydraulic motor, this assembly handles the pressure and movement that comes with real farm work. The swivel fittings are especially handy when you’ve got equipment that needs to pivot or rotate during operation.

Made to Last

Farm hydraulics take a beating from pressure spikes, vibration, and weather exposure. This assembly uses quality materials and proper construction to handle the demands of agricultural equipment. The swivel fittings are built to rotate smoothly under pressure without developing leaks, and the hose itself resists wear from constant flexing and movement.

Good to Know

Installation is straightforward—just make sure both connection points are clean before threading on the fittings. Don’t over-tighten the BSP threads; they seal on the threads themselves, not with a crush washer. If you’re replacing an existing hose, measure twice before ordering to make sure the length works for your setup. A little extra length is usually better than coming up short when you need to make those connections.