Hydraulic Crimp Fitting with Code 62 Flange for 1-1/4 Inch Hose

Description

When you’re dealing with hydraulic hoses on your tractor or equipment, having the right crimp fitting can make the difference between a reliable connection and a leak that shuts you down in the middle of a job. This adapter is designed for tractors and equipment that run hydraulic implements like loaders, backhoes, mowers, and remote cylinders. This 4S series crimp fitting gives you a solid, permanent connection between your 1-1/4 inch hose and whatever you’re hooking it to.

What You’re Getting

• Code 62 flange end that matches standard hydraulic system connections on farm equipment
• Straight fitting design for clean, direct runs without unnecessary bends
• 4S series construction built to handle the pressure demands of agricultural hydraulics
• 1-1/2 inch thread size gives you flexibility for different connection points
• Crimp-on design creates a permanent, leak-free seal when properly installed

Built for Real Farm Work

This fitting is right at home on tractors running loaders, three-point implements, or remote hydraulic cylinders. When you’ve got hydraulic lines that don’t quite match up or need to adapt between different fitting types, this piece bridges the gap and keeps your hydraulics flowing smoothly. Whether you’re hooking up a hay spear, connecting a brush hog, or plumbing a set of remote cylinders, this fitting handles the everyday hydraulic connections that keep your operation moving.

Made to Last

They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. This fitting is engineered to handle the vibration, pressure cycles, and environmental challenges that come with farm work. The crimp design creates a mechanical bond that won’t work loose over time like threaded connections sometimes do.

Installation Notes

This is a crimp fitting, so you’ll need proper hydraulic hose crimping equipment to install it correctly. Always use proper thread sealant on hydraulic fittings – never just tape that can contaminate your system. Clean both fitting surfaces before connecting, and don’t over-tighten as this can damage the threads or crack the fitting body. A snug fit with proper sealant beats overtightening every time. Make sure you’ve got the right crimping dies for the 4S series before you start.