Description
When your loader bucket won’t lift, your hay baler arms are dragging, or any other hydraulic implement starts acting sluggish, a worn-out cylinder is often the culprit. This 3-inch bore hydraulic cylinder delivers the reliable power you need to keep your equipment running strong. With a 12-inch stroke and robust 1-1/4 inch rod, it’s built to handle the constant push and pull of serious farm work.
What You’re Getting
- 2500 PSI rating means it won’t back down from heavy loads or tough conditions
- 1/2 inch NPT ports make hookup straightforward with standard hydraulic fittings
- 22-1/4 inch closed center-to-center dimension for proper fitment in your application
- 1-inch clevis pin holes provide solid mounting points that won’t wear out prematurely
- Cross DB series construction you can count on season after season
Built for Real Farm Work
This cylinder fits right into the workhorses of agriculture—from front-end loaders on utility tractors to hay balers, grain carts, and tillage equipment. Whether you’re loading feed, moving dirt, or operating three-point implements, this cylinder provides the muscle to get the job done. The 3-inch bore gives you plenty of lifting power without being overkill for most farm applications.
Made to Last
Cross Manufacturing builds these cylinders to handle what farming dishes out—mud, moisture, temperature swings, and constant use. The welded construction and quality seals mean you won’t be dealing with leaks or weak spots when you need your equipment most. This isn’t a lightweight replacement that’ll leave you stranded during harvest.
Good to Know
Installation is usually straightforward if you’re replacing a similar cylinder—just match up your port sizes and mounting dimensions. Make sure to check your hydraulic fluid level and bleed any air from the system after installation. Keep some hydraulic fluid handy during the swap, as you’ll lose a bit when you disconnect the old lines.
Reviews
There are no reviews yet.