Description
Ever had a hydraulic cylinder that won’t extend or retract smoothly, or worse yet, pulls oil past the seals? Sometimes the issue isn’t worn seals or bad oil—it’s as simple as a missing or damaged breather plug. This handy part converts your double-acting hydraulic cylinder into single-acting operation by allowing one side to breathe while the other side gets full hydraulic pressure.
What You’re Getting
- Converts double-acting cylinders to single-acting operation when needed
- 3/8 inch NPT threaded connection fits most standard hydraulic ports
- Allows proper venting to prevent pressure buildup and seal damage
- Simple screw-in installation that takes just seconds
- Quality Cross manufacturing you can count on
Built for Real Farm Work
This breather plug is perfect for applications where you only need hydraulic power in one direction—like dump trailers, snowplows, or implements where gravity does half the work. By plugging one port and letting it breathe, you get single-acting operation from your double-acting cylinder without buying new equipment.
Made to Last
Cross builds these plugs to handle the pressure and temperature swings of hydraulic systems. The threaded design creates a secure seal while the internal breather mechanism prevents pressure buildup that could damage seals or cause erratic cylinder operation.
Good to Know
Installation is straightforward—just thread it into the port you want to convert to atmospheric pressure. Make sure the system is depressurized before installation, and use thread sealant or tape to prevent leaks. This part has been replaced by Cross part number 196-08169, so if you’re ordering multiple units, that’s the current number to reference.
Reviews
There are no reviews yet.