Clamp Type Implement Yoke for Walterscheid 2400 Series with 1-3/4 x 20 Spline Bore

Description

If you’ve ever had an implement refuse to connect properly or experienced slipping under load, you know how frustrating a worn or wrong implement yoke can be. This clamp-type yoke fits the Walterscheid 2400 series drivelines you’ll find on everything from heavy-duty rotary cutters to forage harvesters. The 1-3/4 inch, 20-spline bore connects securely to your implement’s input shaft while the clamp design ensures a solid hold that won’t work loose during operation.

What You’re Getting

• Clamp-type connection that locks firmly onto implement input shafts
• 1-3/4 inch bore with 20-spline configuration for maximum power transfer
• Walterscheid 2400 series specifications for proper driveline compatibility
• Precision-machined bearing surfaces for smooth universal joint operation
• Heavy-duty construction built to handle high-torque applications

Built for Real Farm Work

This yoke is designed for the serious implements that require Walterscheid 2400 series strength. The 1-3/4 inch diameter and 20-spline configuration aren’t arbitrary – they’re engineered for maximum power transfer with minimal wear. More splines mean more contact area, distributing loads evenly and preventing the concentrated wear that destroys shafts. You’ll find this size on larger rotary cutters, heavy-duty mowers, and other implements that need to handle substantial horsepower without slipping or wearing prematurely.

Made to Last

Weasler builds their yokes to farm standards, not hardware store quality. The forged construction and precision machining mean this yoke will maintain proper fit and function through seasons of hard use. The design locks securely with its mating components, transferring full engine power without the slippage that wears out round shafts. The bearing surfaces are finished to exact tolerances for smooth operation and long universal joint life.

Installation Notes

The clamp design makes installation straightforward – slide onto the implement’s splined shaft and tighten the clamp hardware securely. The 20-spline configuration must match your equipment exactly. Clean all splines thoroughly before assembly – any contamination causes rapid wear. Make sure you’ve got proper spline engagement depth before securing the clamp to prevent slippage under load.