Code 61 Hydraulic Flange Fitting with 1/2 Inch Thread for 1/2 Inch Hose

Description

When you’re running hydraulic hoses on your tractor and need a secure, leak-free connection to pumps, motors, or valve blocks, this Code 61 flange fitting gets the job done right. Having the right fitting can make all the difference between a job that holds up and one that leaves you stranded in the field, and this flange head fitting connects 1/2-inch hydraulic hose to equipment with a secure, leak-free seal that won’t back out under pressure. The flange design is what sets this apart from regular threaded fittings—it’s built for serious hydraulic work.

What You’re Getting

• Flange design that spreads loads across multiple bolts instead of relying on threads alone, giving you a much stronger connection
• Crimp-on fitting that requires proper crimping equipment and dies for installation, ensuring a permanent, reliable seal
• 1/2 inch thread size designed to work with standard 1/2 inch hydraulic hose
• T2000 series construction built to handle farm equipment demands

Built for Real Farm Work

This fitting is designed for tractors, combines, skid steers, and implements that use 1/2-inch hydraulic hose in their systems, connecting everything from loader circuits to three-point hitch pumps and auxiliary hydraulics that power attachments like mowers, balers, and tillage equipment. Whether you’re running a front loader, powering a hay baler, or operating a bush hog, this is the type of connection that keeps your hydraulics working when you need them most.

Made to Last

These fittings are built to handle the tough conditions of agricultural work—pressure surges when you engage the PTO, temperature swings from morning frost to afternoon heat, and the constant vibration that comes with working ground or hauling loads. The flange connection distributes stress better than threaded connections, so you won’t have to worry about loosening up over time.

Good to Know

This is a crimp-on fitting that requires proper crimping equipment and dies for installation, so make sure to use the correct die size for both the fitting and hose combination. If you don’t have crimping equipment, most hydraulic shops can crimp the fitting onto your hose. The flange bolts directly to your equipment’s hydraulic port using the Code 61 bolt pattern.