Code 61 Flange Crimp Fitting for 1-1/2 Inch Hydraulic Hose

Description

When you’re building or repairing hydraulic hose assemblies on bigger equipment, you need fittings that can handle the pressure and vibration without backing out or leaking. This Code 61 flange head fitting connects your 1-1/2 inch hydraulic hose to pumps, motors, or valve blocks with a secure, leak-free connection that spreads loads across multiple bolts instead of relying on threads alone. It’s the heavy-duty solution for when standard fittings just won’t cut it.

What You’re Getting

• Flange design distributes stress across multiple mounting bolts for superior holding power
• Secure connection that won’t back out under pressure spikes or vibration
• Built to handle the larger flow rates and higher pressures of 1-1/2 inch hydraulic systems
• Crimp-on design creates a permanent, reliable connection when properly installed

Built for Heavy-Duty Farm Work

This fitting is designed for larger tractors, combines, and heavy implements that use 1-1/2 inch hydraulic hose in their systems. You’ll find it connecting everything from loader circuits to three-point hitch pumps and auxiliary hydraulics that power attachments like mowers, balers, and tillage equipment. The larger hose size means this is typically found on equipment where high flow rates are needed for fast cycle times or powerful hydraulic motors.

Made to Last

These fittings are built to handle the tough conditions of agricultural work—pressure surges when you engage the PTO, temperature swings from morning frost to afternoon heat, and the constant vibration that comes with heavy equipment operation. The flange mounting system provides a more secure connection than threaded fittings, especially important on larger diameter hoses where higher forces are involved.

Installation Notes

This is a crimp-on fitting that requires proper crimping equipment and dies for installation. Make sure to use the correct die size for both the fitting and hose combination. The flange end will need to be bolted to your equipment’s hydraulic port using the appropriate gasket or O-ring seal. Always follow your crimper manufacturer’s specifications for proper crimp dimensions.