Description

When your loader’s getting sluggish or you’re hearing unusual whining from the hydraulic pump, there’s a good chance your hydraulic filter is clogged with debris and starving your system of clean fluid. Baldwin filters are engineered to handle the pressure spikes, temperature swings, and contaminant loads that come with real-world hydraulic work. This spin-on filter restores proper flow and protects those expensive hydraulic components from the contamination that turns them into costly repairs.

What You’re Getting

10 7/16 inch length with 4 1/4 inch outer diameter for proper filtration capacity
1 1/8-16 thread size for secure mounting without adapters needed
Includes replacement gasket for leak-free installation every time
Filtration media captures particles and debris before they can damage sensitive hydraulic components
Baldwin quality construction that holds up to demanding work cycles

Built for Real Farm Work

This filter works on John Deere tractors and Owatonna loaders that see daily use around farms and construction sites. Whether you’re running a loader bucket all day, cycling hydraulics for implement work, or operating under dusty conditions, clean hydraulic fluid keeps your equipment running smooth and responsive. Modern tractors have hydraulic systems operating at pressures exceeding 3,000 PSI, making quality filtration absolutely critical.

Made to Last

Baldwin has been making filters for decades, and they know what it takes to handle farm conditions. Quality construction means it handles the pressure cycles and temperature swings that come with demanding hydraulic work while maintaining consistent filtration performance. The filter housing withstands vibration and stress that comes with heavy equipment operation.

Installation Notes

This is a direct spin-on replacement that installs in minutes. Clean the filter base thoroughly before installation and hand-tighten plus 3/4 turn after the gasket contacts the base. Change filters every 500-1000 hours depending on your operating conditions—more often if you’re working in dusty environments or doing heavy hydraulic work. Always check your hydraulic fluid level after filter changes.