Oil Bath Air Cleaner Assembly for Ford 2000 3000 2600 3600 Series Utility Tractors

Description

If you’ve been dealing with dusty air getting past a worn-out air cleaner on your older Ford utility tractor, you know how quickly dirt can turn engine oil black and cause expensive wear. This oil bath air cleaner assembly brings back that old-school filtration system that actually worked better than many folks realize – especially when you’re working in really dusty conditions like cultivating dry ground or running through harvest dust.

What You’re Getting

• Complete 6-inch diameter oil bath assembly that traps dust particles in oil before they reach your engine
• Proven filtration system that maintains consistent airflow even as it collects dirt – no clogged filters to restrict power
• Durable construction built to handle the vibration and temperature swings of farm work
• Direct replacement for original equipment – bolts right up using existing mounting points

Built for Real Farm Work

This assembly fits Ford 2000 and 3000 series tractors from 1965-1974, plus the later 2600 and 3600 models from 1975-1981. These were the backbone utility tractors on thousands of farms, handling everything from cultivating and planting to hay work and loader duty. The oil bath system was particularly effective for tractors working in grain harvest, dusty cultivation, or any operation where paper filters would clog constantly.

Made to Last

Oil bath air cleaners use simple physics instead of disposable filters. As dusty air enters, it’s forced to make a sharp turn over the oil surface, causing heavy particles to drop into the oil bath. The remaining air passes through an oil-wetted mesh that catches finer dust. Unlike paper filters that restrict airflow as they load up, this system maintains consistent breathing for your engine.

Good to Know

Installation takes about 30 minutes with basic hand tools. Clean the air intake thoroughly before mounting, and fill the oil cup to the marked level with the same weight oil you use in the engine – overfilling reduces effectiveness. Service involves draining the dirty oil and refilling with fresh oil every 50-100 hours depending on conditions. In really dusty work, check it more often.