Description
When you’re working tough ground or heavy residue, having the right sweep makes all the difference. This 10-inch field cultivator sweep is designed to break through hardpan, slice through residue, and leave a smooth seedbed behind. If your old sweeps are worn down or you need replacements for spring field work, this one’s built to handle whatever your cultivator dishes out.
What You’re Getting
- 10-inch working width gives you good soil coverage without excessive draft
- 1/4-inch thickness provides the strength to handle rocks and tough conditions
- 40-degree shank angle design works with your cultivator’s geometry for proper penetration
- 3/8-inch bolt holes with 1-5/8 to 1-3/4 inch spacing fit a wide range of shanks
- Cast construction resists chipping and holds its edge longer than stamped sweeps
Built for Real Farm Work
This sweep fits field cultivators with 40-degree shanks and the standard 3/8-inch bolt pattern. Whether you’re working corn ground in the spring, preparing a clean seedbed for beans, or doing fall tillage, this sweep cuts clean and penetrates well. It’s the kind of part that works on everything from small utility tractors pulling compact cultivators to big rigs working wide implements.
Made to Last
Field cultivator sweeps take a beating from rocks, roots, and abrasive soil. This one’s cast from quality steel that resists wear and holds up to the constant flexing and impact that comes with tillage work. The 1/4-inch thickness gives you plenty of material to work with as the sweep wears.
Installation Notes
This is a direct bolt-on replacement for most 40-degree shanks. Make sure your shank angle matches before ordering—40-degree shanks are less common than the standard 47-degree, but they’re used on some older and specialty cultivators. Check your bolt spacing to confirm the fit.
Reviews
There are no reviews yet.