Description
When your old Ford N-series tractor starts burning oil or losing compression, you know it’s time for an engine refresh. This basic in-frame overhaul kit gives you the essentials to get your 119.7 CID four-cylinder gas engine back to running strong without the expense of a complete teardown. It’s the smart choice when your block and crankshaft are still in good shape but the cylinders need attention.
What You’re Getting
- Includes 0.040-inch thin-wall sleeves, three-ring pistons with rings, pins and retainers – everything for a solid cylinder rebuild
- Complete valve-grind gasket set and pan gasket set keeps everything sealed up tight once you’re done
- Direct replacement for original equipment – no modifications or machine work required on a standard bore engine
- Tru-Power quality components that are built to handle the demands of farm work
Built for Real Farm Work
This kit fits all Ford 2N, 9N, and 8N tractors – the workhorses that built American agriculture in the 1940s and 50s. Whether you’re using yours for hay work, cultivation, or just getting around the farm, these tractors are still earning their keep decades later when properly maintained.
Made to Last
The thin-wall sleeve design allows for proper heat transfer while maintaining strength where it counts. Quality pistons and rings provide the compression you need for good fuel economy and power, while the complete gasket sets ensure your rebuilt engine stays leak-free through years of service.
Good to Know
This is a basic in-frame kit, so you’ll be working with the engine in the tractor rather than pulling it completely apart. If your cylinder bores are already oversized or you need bearings and valves, you’ll want to look at a complete overhaul kit instead. Have your cylinders checked for taper and out-of-round before ordering to make sure this kit will work for your situation.
Reviews
There are no reviews yet.