Implement Yoke for 35 Series PTO Drivelines with 1-1/2 Inch Square Bore

Description

When your PTO yoke starts wearing out, you’ll know it by the vibration and noise that gets worse every time you hook up. That wobble isn’t just annoying—it’s eating up your U-joints, stressing your driveline, and making your whole tractor shake. When yoke bearings wear out or the bore gets sloppy, you get vibrations that destroy U-joints, damage implement gearboxes, and create dangerous operating conditions. This Weasler 35 series implement yoke gives you back that solid, smooth connection your equipment needs.

What You’re Getting

• Precisely machined 1-1/2 inch square bore that maintains tight tolerances so it slides on snug without slop
• 35 series heavy-duty construction built to handle the constant abuse of farm work
• 1-1/4 inch bearing cap diameter with 3-7/32 inch overall length for standard U-joint compatibility
• 4-1/4 inch center-to-end measurement for proper driveline geometry
• Forged construction that won’t crack under shock loads or high torque

Built for Real Farm Work

This 35 series size is common on 40-80 horsepower implements, from brush hogs and rotary cutters to feed mixers and tillers. Every time you engage that bush hog, feed mixer, or tiller, this yoke transmits all your tractor’s power while dealing with misalignment, shock loads, and constant angle changes. The square bore design is found on many implements where a simple, reliable connection is needed without the complexity of splines.

Made to Last

Weasler doesn’t just make generic driveline parts – they understand the punishing conditions farm equipment faces. This 35 series yoke uses heavy-duty construction throughout, from the precisely machined bore that maintains tight tolerances, to the robust bearing caps that keep U-joints running true. It’s built to handle temperature swings, shock loads, and the kind of abuse that comes with years of daily use.

Good to Know

Installation is straightforward—slide the yoke onto your implement’s 1-1/2 inch square input shaft and secure it with the appropriate hardware. When one yoke shows wear, inspect the entire driveline as problems rarely occur in isolation. Make sure your series numbers match up throughout the driveline for proper fit and balance. Many farmers stock spare yokes for critical implements – PTO failures during haying or harvest are expensive.