Mudguard-Mounted Three-Point Hitch Lift Control Switch for John Deere 10, 20, 30 Series Tractors

Description

When your three-point hitch starts acting up or only works sometimes, it’s often this mudguard switch that’s failed. The mudguard-mounted lift control switch provides convenient three-point hitch operation without reaching back to the main controls. This handy part puts three-point control right where John Deere intended – at your fingertips on the fender where you can reach it without twisting around in your seat.

What You’re Getting

• Direct replacement switch that restores reliable lift and lower operation
• Electronic control for instant response – no more fighting with sticky manual levers
• Installing this cover requires proper alignment with switch #58730 and seal #58532.
• Weather-resistant design built to handle the bumps and vibration of field work
• Ergonomic fender location reduces operator fatigue during repetitive tasks

Built for Real Farm Work

Whether you’re constantly adjusting cultivator depth, raising and lowering your bush hog at row ends, or fine-tuning disc harrow height, this switch puts control where your hand naturally falls. It’s especially valuable during headland turns where you’re lifting and lowering implements dozens of times per field. Whether adjusting implement height on a 6420, raising the cultivator on a 6330, or controlling rear attachments – this switch handles the workload.

Made to Last

Farm equipment takes a beating, and mudguard-mounted switches are no exception. This replacement is built to handle temperature swings, moisture, and the occasional bump from tree branches or loader buckets. The electronic design provides years of reliable service with positive engagement that won’t fade over time.

Installation Notes

Disconnect your battery before starting to prevent electrical shorts. This is an excellent time to test switch function and clean any corrosion from connections. Most operators complete installation in 30-45 minutes. Apply dielectric grease to connections before assembly to prevent future corrosion problems that cause intermittent operation. Test all functions after installation to ensure proper operation.