Description
When a hose splits or gets cut, you don’t have time to run to town for a whole new one. This poly hose mender lets you fix that damaged section and get back to work in minutes. Just cut out the bad spot and connect the good ends with this handy fitting—it’s like giving your hose a second life.
What You’re Getting
- Dual 5/8 inch hose barbs for a secure connection on both ends
- Tough poly construction that won’t rust or corrode like metal fittings
- Ridged barb design grips the hose tight and won’t pull loose under pressure
- Smooth interior bore maintains good flow without restrictions
Built for Real Farm Work
This mender works great for irrigation lines, livestock waterers, spray equipment, and any other 5/8 inch hose that’s seen better days. Whether it’s a garden hose that got nicked by the mower or a water line that froze and cracked, this fitting gets you flowing again without replacing the whole run.
Made to Last
Poly construction means this mender won’t rust out like brass or steel fittings do. It handles freeze-thaw cycles better than metal and won’t corrode from fertilizers or chemicals that might flow through your lines.
Installation Notes
Cut out the damaged section with clean, square cuts for the best seal. Push each hose end firmly onto the barbs and secure with hose clamps if you’re running higher pressures. The barbs are sized to fit snugly in standard 5/8 inch inside diameter hose.
Reviews
There are no reviews yet.