Description
Nothing mucks up a clean seedbed like scrapers that aren’t doing their job. When your disc scrapers get bent, worn out, or lost altogether, the discs start packing with mud and debris—and that’s when your field work goes from smooth to frustrating in a hurry. This right-hand scraper arm gets your discs running clean again so you can get back to making good seedbeds.
What You’re Getting
- Sturdy steel construction that handles the constant flexing and impact of field conditions
- Standard 5/8 inch width slot that fits properly on disc gangs without binding
- Right placement for front gang positions and left rear applications
- Direct replacement that bolts right up with the spiral pin you already have
Built for Real Farm Work
This scraper arm fits a variety of John Deere disc harrows and the 726 finisher—machines you’re probably running for seedbed prep, residue management, or fall tillage work. Whether you’re working corn stalks in the fall or prepping for spring planting, these are the tools that help you get a uniform finish across the field.
Made to Last
Scraper arms take a beating from rocks, roots, and constant soil contact, so this one’s built to flex without breaking. The steel construction and proper heat treatment mean it’ll bend back into shape when it hits something solid instead of snapping off and leaving you hunting for parts in the middle of the season.
Good to Know
Installation is straightforward—just drive out the old spiral pin, slip off the worn scraper, and put the new one in place. You’ll need that 5/16 inch by 1-1/4 inch spiral pin to secure it. If you’re replacing several scrapers, now’s a good time to check your disc spacing and make sure everything’s running where it should be.
Reviews
There are no reviews yet.