Sealed Insert Bearing with Eccentric Lock Collar for Agricultural Equipment

Description

When you’re dealing with rotating shafts on plows, discs, cultivators, or other farm implements, a failed bearing can shut down your whole operation. This sealed insert bearing with its spherical race design handles the misalignment and tough conditions that come with field work, while the eccentric lock collar makes installation and removal simple when maintenance time comes.

What You’re Getting

• Sealed design keeps dirt, moisture, and debris out while holding grease in
• Spherical race automatically adjusts for shaft misalignment during operation
• Eccentric lock collar provides secure mounting without set screws that can work loose
• Narrow inner race design maximizes load capacity in tight spaces
• 1-3/16 inch bore fits common agricultural shaft sizes

Built for Real Farm Work

This bearing is designed for the rotating components on tillage equipment, planters, grain drills, and other implements where shafts need to spin smoothly under load. The spherical race handles the inevitable misalignment that happens when equipment flexes over uneven ground or when mounting holes aren’t perfectly aligned.

Made to Last

Agricultural bearings take a beating from dust, moisture, fertilizer, and constant vibration. The sealed construction keeps contaminants out while retaining lubrication, and the quality steel construction handles heavy radial and thrust loads that come with implement operation.

Installation Notes

The eccentric collar design means you don’t need to remove the entire assembly to replace the bearing—just loosen the collar and slide it off the shaft. When installing, make sure the shaft is clean and the collar is properly tightened to prevent slippage during operation.