Description
When you’re putting together a sprayer boom or fixing one that’s seen better days, the nozzle body is where everything comes together. This brass split eyelet nozzle body is the connection point between your boom pipe and spray tip—and if it’s not sealing right, you’ll have chemical dripping where it shouldn’t and uneven coverage where you need it most.
What You’re Getting
- Split eyelet design makes installation and removal easier than wrestling with solid bodies
- Brass construction that won’t corrode from farm chemicals or crack from UV exposure
- Standard threading that accepts all TeeJet spray tips and caps
- Tight seal on your 1/2 inch boom pipe with the right drill hose size for proper fit
Built for Real Farm Work
This nozzle body is designed for wet boom systems where the chemical flows through the boom pipe to each nozzle. You’ll find these setups on field sprayers, three-point hitch sprayers, and pull-behind units that handle everything from herbicides to liquid fertilizer. The same quality material TeeJet has been using for decades in agricultural spray systems means this part will handle whatever you’re spraying.
Made to Last
Brass holds up to farm chemicals and daily use better than plastic alternatives. The threads stay sharp, the orifice keeps its shape, and you won’t find yourself constantly replacing worn-out tips. The split eyelet design also means less stress on the threads when you’re installing or removing spray tips in the field.
Installation Notes
The split eyelet design lets you slide this body over your boom pipe and then drill the proper size hole for a snug fit. Make sure you have the right drill bit size (9/32 inch) for a proper seal. A little thread sealant on the spray tip threads will prevent weeping and keep everything tight through the vibration of field work.
Reviews
There are no reviews yet.