Description
You know that moment when you’re backing up to hook an implement and the whole three-point hitch is wobbling around like a loose tooth? That’s usually a worn stabilizer stud talking. This handy replacement stud is what keeps your stabilizer arms properly mounted and your implements rock-steady where they should be.
What You’re Getting
- 5/8 inch UNF threading that matches your tractor’s original specifications perfectly
- Heavy-duty construction that won’t strip or break under the stress of field work
- Comes in a convenient 2-pack so you’ll have what you need for both sides
- Complete with nuts included – no hunting around for the right hardware
Built for Real Farm Work
These studs fit a wide range of classic workhorses including Massey Ferguson models from the old TE series up through the 200 series, plus Ford New Holland tractors from the N series through the 10 series. Whether you’re running a compact utility tractor for around the barn or a bigger machine for serious field work, this is the same quality hardware that came from the factory.
Made to Last
Farm equipment takes a beating, and stabilizer hardware gets stressed every time you raise, lower, or transport an implement. These studs are built from quality steel with proper threading that won’t wear out prematurely. The 5/8 inch UNF threads provide plenty of holding power while the included nuts ensure you get the right torque every time.
Good to Know
Installation is straightforward – just make sure to support the stabilizer arm while you’re swapping out the old stud. A little anti-seize on the threads makes future removal much easier. Since this comes as a 2-pack, you might as well do both sides while you’re at it – if one’s worn out, the other probably isn’t far behind.
Reviews
There are no reviews yet.