Description
When you’re mixing chemicals for spraying operations, getting the right concentration is critical for both crop protection and safety. This Banjo 2-inch venturi inductor uses the flow from your pump to automatically draw and mix chemicals, fertilizers, or additives into your spray system. No more manual mixing or guessing at ratios—the venturi does the work for you while you focus on covering your fields.
What You’re Getting
- 2-inch male pipe thread inlet that fits standard pump setups with 50 PSI operating pressure
- 7/16-inch inductor opening draws 49 GPM of chemical concentrate at test conditions
- Polypropylene construction that resists corrosion from agricultural chemicals
- Consistent mixing ratios based on your pump flow—no electrical power needed
- Works with volume pumps in the 80-240 GPM range for larger spraying operations
Built for Real Farm Work
This venturi is designed for agricultural spraying systems where you need to inject herbicides, insecticides, liquid fertilizers, or other additives into your spray tank or boom system. It’s particularly useful for custom applicators and larger farming operations that need precise chemical mixing on the go. The unit was tested with a 2-inch Banjo pump and 5.5 HP Honda motor, but it’ll work with other pumps in the right flow range.
Made to Last
Farm chemicals can be tough on equipment, but this polypropylene construction holds up to the acids, bases, and solvents you’ll encounter in agricultural applications. The simple venturi design has no moving parts to wear out or clog, just the physics of fluid flow doing the mixing work for you.
Good to Know
Performance varies depending on your specific pump and the viscosity of what you’re pumping. Water-based chemicals flow differently than thick fertilizers, so test your setup before heading to the field. Make sure your pump can deliver the volume and pressure needed—this venturi works best with pumps that can move 80 GPM or more.
Reviews
There are no reviews yet.